|
Post by jetjeff on Nov 28, 2017 5:33:22 GMT -5
Hi Shannon,
You could always go the Kamps route and fabricate the NGV and turbine wheel.
Jet beetle sells a similar sized wheel and NGV, I wonder how they compare on price.
Regards
Jeff
|
|
|
Post by jetjeff on Nov 28, 2017 5:37:48 GMT -5
Hi Shannon,
I just found an old (2009) email from Horace T.L.Ho from jet beetle on a 84mm wheel,,,250.00 for the wheel (machined and balanced) and 250.00 for the NGV (machined)
Regards
Jeff
|
|
|
Post by madrocketscientist on Nov 28, 2017 5:38:58 GMT -5
Hi Jeff,
I did contact Jet Beetle and they didn't have any 84mm bits in stock.
I have paid the extra to Yili and I am hoping it was just an internal miscommunication between sales and manufacturing. In the end it comes to around 75% of the cost of a the Jetmax parts, although the Yili NGV is inconel. I will put up pictures when they arrive, they estimate 20 days or so until they ship.
Shannon.
|
|
|
Post by madrocketscientist on Nov 28, 2017 5:44:45 GMT -5
Hi Shannon, I just found an old (2009) email from Horace T.L.Ho from jet beetle on a 84mm wheel,,,250.00 for the wheel (machined and balanced) and 250.00 for the NGV (machined) Regards Jeff The ones I just purchased (and hopefully eventually arrive) cost $200USD for the 84mm turbine wheel and $289USD for the NGV. $54USD shipping. Shannon.
|
|