|
Post by ernie wrenn on Sept 6, 2011 20:26:40 GMT -5
Ya'll got to move closer... I have a 20,000 sq ft machine shop fully loaded and only me there. The ultimate man cave for motor heads.
Just got tired of the rat race and decided to cut back and have fun. My shop is available to anyone in need. If I can't get it done, I have a FULL fabrication shop with CNC and waterjet available.
ernie
|
|
wolfdragon
Senior Member
Joined: April 2011
Posts: 287
|
Post by wolfdragon on Sept 15, 2011 17:09:29 GMT -5
... try not to hurt yourself, the forces needed are more than you would expect
|
|
|
Post by ernie wrenn on Sept 16, 2011 8:37:51 GMT -5
Plunge cut the mass.. DO not try to mill it out.(Keeps from snatching the piece out of the vise). Keep the speed down and the tool cool, then try light milling cuts to get the finish.
ernie
|
|
|
Post by turbochris on Sept 16, 2011 9:09:19 GMT -5
I'm really good at getting mills and drill presses and lathes to throw heavy chunks of metal through the walls and whatnot.
|
|
|
Post by Johansson on Sept 19, 2011 14:15:35 GMT -5
I would love to see a picture of you milling the flange in that outfit! ;D
|
|
|
Post by ernie wrenn on Oct 10, 2011 13:24:49 GMT -5
Make sure you keep the tool cool. If it even gets hot it is gone. Using a drill press is frustrating, they will throw the tool at you. Always cut INTO the tool, this will keep it from grabing.. small cuts .010 at a time to control chatter.
best of luck and plenty of beer.
ernie
|
|
|
Post by Johansson on Feb 24, 2012 16:00:40 GMT -5
How are things going with the build, any progress?
|
|
|
Post by stoffe64 on Apr 24, 2012 2:45:49 GMT -5
Hello Anders I have abandoned that TV61 projekt Will continue with My bigger Holset HX60w When time lets me to,we have mowed out Of the apartment and i am also looking for à work closer to Kramfors ,time for changes in life That Holset Hx60 i found was à stroke of luck Interesting thing with 76mm comp inducer and 86mm Turbine exducer,bigger turbo than the TV61 which had Only à 61mm comp inducer. BIGGER IS BETTER!!
|
|