jayakod2
Member
Joined: November 2012
Posts: 20
|
Post by jayakod2 on Nov 10, 2012 15:32:47 GMT -5
thanks
|
|
8maddog8
Member
Joined: July 2012
Posts: 24
|
Post by 8maddog8 on Nov 16, 2012 6:40:16 GMT -5
Anyway, so i finally got around to recording a quick video. This is just of the gauges during a run this afternoon. (watch in 720p to see the gauges better) It didnt seem to be getting too hot during this run. Was getting to around 550-600 degC with about 50-60k rpm. Does this seem about right? Also, what rpm should i be keeping it under? JetSpec says 110k rpm but no way would i take it that far Might try and get a couple more videos tomorrow if i have time (in the middle of packing to move back down south) Cheers
|
|
8maddog8
Member
Joined: July 2012
Posts: 24
|
Post by 8maddog8 on Nov 19, 2012 17:24:04 GMT -5
I chucked a couple more videos up from the other day. Just a normal run And being a little naughty I was thinking of putting a jet pipe on it now and maybe an afterburner down the track for coolness. Is there a general rule-of-thumb for the jet pipe sizing? The current outlet is 3", so how long and what diameter should it reduce down to? Cheers Adan
|
|