Hey I was thinking to post my dragster project here at JATO The first stage of construction was to get hold of any matrial to build the combustion chamber. The first step was to manufacture the end plate and the flange for the combustion chamber.
Last Edit: Dec 20, 2013 15:57:57 GMT -5 by j37timmy
Hello again, here is some pictures of the construction of the combustion chamber.
First I had to manufacture the flange to the combustion chamber. So I started to rough cut a hole in the flange with the plasma cutter. Then I bolted the flange to the lid that I had at manufactured before. Then it was just to put it all up in the lathe and run and here is the result.
looks very good Timmy, i whished that i had your skills in constructing combustors, i am still stucked with that part, Think i gunna need help with that... where are you located in sweden?, i build from a holset HX60W what kind of HX60 do you use?, what inducer? what turbine size?, my has inducer 76mm on compressor and 86mm turbine exducer! cheers stephan