bournaVee
Junior Member
Joined: January 2017
Posts: 66
|
Post by bournaVee on Aug 27, 2017 8:11:01 GMT -5
Hi John, Here are the full details *) Flame tube: Outer diameter: 8 inches Inner diameter: 5 inches Height : 5.9 inches(150mm) Using 0.5mm stainless steel sheet.
*) bearing: Bearing height is 21mm. The two grooves divide the height into 3 equal parts
Groove dimensions: 2mm each in height by 0.5mm depth.
Thanks a lot Bourna Vee
|
|
bournaVee
Junior Member
Joined: January 2017
Posts: 66
|
Post by bournaVee on Aug 27, 2017 8:11:30 GMT -5
Hi John, Here are the full details *) Flame tube: Outer diameter: 8 inches Inner diameter: 5 inches Height : 5.9 inches(150mm) Using 0.5mm stainless steel sheet.
*) bearing: Bearing height is 21mm. The two grooves divide the height into 3 equal parts
Groove dimensions: 2mm each in height by 0.5mm depth.
Thanks a lot Bourna Vee
|
|
|
Post by racket on Aug 28, 2017 4:11:17 GMT -5
Hi Bourna Vee
What are your fueling methods ??
Are you using evaporators/vapourisers or spray nozzles ................and how many ??
The bearing grooves at 0.5 mm deep by 2 mm wide don't sound like O-ring grooves.
I really need a lot more information about what you're doing and intend to build , from the information so far provided on this Build Thread I really can't help much :-(
Cheers John
|
|
bournaVee
Junior Member
Joined: January 2017
Posts: 66
|
Post by bournaVee on Oct 5, 2017 9:12:47 GMT -5
project not abandoned
|
|
bournaVee
Junior Member
Joined: January 2017
Posts: 66
|
Post by bournaVee on Nov 3, 2017 21:04:37 GMT -5
Hi all, Given that fuel isn't a problem, how long can one really run a gas turbine?
|
|
|
Post by smithy1 on Nov 16, 2017 21:15:14 GMT -5
Hi all, Given that fuel isn't a problem, how long can one really run a gas turbine? Indefinitely..! Smithy.
|
|
bournaVee
Junior Member
Joined: January 2017
Posts: 66
|
Post by bournaVee on Nov 17, 2017 4:50:07 GMT -5
Thanks Smithy
|
|