|
Post by stoffe64 on Mar 24, 2024 13:09:45 GMT -5
Hello all ,have this Holset HX60 turbo to sell It has a 76mm comp wheel inducer and 86mm turbine exducer with a brand new 26 housing Asking for 325 usd +shipping Best regards Stephan Höglund
|
|
|
Post by stoffe64 on Mar 11, 2024 8:54:26 GMT -5
The compressor wheel that i sell dont fit that turbo my friend, it is a hx83, titanium wheel
|
|
|
Post by stoffe64 on Mar 11, 2024 6:28:07 GMT -5
Yeah a COOL thing!
|
|
|
Post by stoffe64 on Mar 11, 2024 0:19:55 GMT -5
Hello i am selling this compressor wheel for the HX82 TURBO It has a 100 MM compressor wheel inducer,ot is brand new mambatek, never used i am looking for 200USD for it! Best regards/Stephan Höglund, sweden
|
|
|
Post by stoffe64 on Sept 25, 2023 15:23:17 GMT -5
WOW, i am VERY sad to see this,i suffer with you John....rebuild everything basicly!
|
|
|
Post by stoffe64 on Sept 25, 2023 15:22:45 GMT -5
WOW, i am VERY sad to see this,i suffer with you John....rebuild everything basicly!
|
|
|
Post by stoffe64 on Sept 9, 2023 2:37:52 GMT -5
No clipping, that wheel is a paperweight now!,its structural is damaged and could explode if used
|
|
|
Post by stoffe64 on Sept 8, 2023 17:58:05 GMT -5
No that was NOT Good at all,infact it was devastating!! My thoughts are many now,how Good is a chinese replacement?what is your experience there John?.....a bearing housing is one thing BUT a turbine wheel is a totally different thing.
|
|
|
Post by stoffe64 on Sept 8, 2023 6:09:21 GMT -5
|
|
|
Post by stoffe64 on Sept 7, 2023 0:37:58 GMT -5
|
|
|
Post by stoffe64 on Sept 7, 2023 0:23:39 GMT -5
|
|
|
Post by stoffe64 on Sept 7, 2023 0:21:03 GMT -5
Thank you guys,i Will look Into those places,that latest link did had some bearing housings....which i am studying now....it is just this feeling i have...how Good IS the china parts?,such bearing housing for instance....Will it be Good enough or would it just explode in my face.....still thinking on this one
|
|
|
Post by stoffe64 on Sept 6, 2023 11:21:12 GMT -5
Hello guys! A update on my project, today i managed to separate the turbine housing/heatshield, i had to use a press and press on the turbine wheel...forcing the heatshield out,the turbine wheel seem to be ok i Think,can not see any damage to it The heatshield look a bit sad after my violence to it trying to BONK it out with a drift,screwdrivers etc..... now i need to find a serviceable bearing housing!! Anyone in here might have such?
|
|
|
Post by stoffe64 on Jul 7, 2023 12:39:08 GMT -5
Hi Stephan Heat the entire assembly , and put ice into the heatshield , it should contract away from the thicker scroll Cheers John Thank you John for the idea how to Free it....in fact i got it to move 2mm or so then it stucked again, then you drive it back and so forth....i do have availability to a induction heater where you really can heat it up glowing red
|
|
|
Post by stoffe64 on Jul 6, 2023 5:04:36 GMT -5
|
|