Post by slittlewing on Sept 2, 2018 12:22:35 GMT -5
For sale - combustion chamber
5” OD steel wall outer tube
Bolted top cap (5mm thick) laser cut
Laser cut flange at turbo end, expect you would need to replace this to suit your turbo
Fitted with axial 4mm open propane injector and kjet Bosch wet injector (you should replace this with an oil burner nozzle)
2.5” stainless air feed tube, spark plug boss at rear
Flame tube is 3.5” perforated, should be replaced with proper one to suit your application. Worked on propane for my 2.5” Holset.
Does not come with heatshield or high temp wrap
May be of use to a new builder please let me know!
Cheers
Scott
5” OD steel wall outer tube
Bolted top cap (5mm thick) laser cut
Laser cut flange at turbo end, expect you would need to replace this to suit your turbo
Fitted with axial 4mm open propane injector and kjet Bosch wet injector (you should replace this with an oil burner nozzle)
2.5” stainless air feed tube, spark plug boss at rear
Flame tube is 3.5” perforated, should be replaced with proper one to suit your application. Worked on propane for my 2.5” Holset.
Does not come with heatshield or high temp wrap
May be of use to a new builder please let me know!
Cheers
Scott