laorjunior
New Member
Joined: January 2023
Posts: 4
|
Post by laorjunior on Jan 6, 2023 2:23:11 GMT -5
Hi everyone, I download the GR 180 jet engine a while ago, but I just found that the compressor wheel, Gerald Rutten used, is no longer available and to make matters worse I know very little of the maths involved. My plans were to just follow the drawings. Any help will be appreciated.
|
|
|
Post by racket on Jan 6, 2023 3:08:19 GMT -5
Hi Do you have the specifications, part number etc ?? If you do , have a look at the KTS Site ktsturbobilletx.com/ checkout their catalogue Cheers John
|
|
dieselguy86
Veteran Member
Joined: September 2014
Posts: 186
|
Post by dieselguy86 on Jan 6, 2023 21:04:31 GMT -5
KTS makes the wheel, id have to do some digging to find it again.
|
|
laorjunior
New Member
Joined: January 2023
Posts: 4
|
Post by laorjunior on Jan 22, 2023 0:15:46 GMT -5
Hi Do you have the specifications, part number etc ?? If you do , have a look at the KTS Site ktsturbobilletx.com/ checkout their catalogue Cheers John Yes, the wheel Gerald used is the schwitzer 316954 I also have the measurements.
|
|
dieselguy86
Veteran Member
Joined: September 2014
Posts: 186
|
Post by dieselguy86 on Jan 22, 2023 0:21:44 GMT -5
|
|
ripp
Veteran Member
I'm sorry, I don't speak english, so I torment you (and myself) with a translation program,Sorry
Joined: January 2013
Posts: 230
|
Post by ripp on Jan 22, 2023 16:16:14 GMT -5
|
|
laorjunior
New Member
Joined: January 2023
Posts: 4
|
Post by laorjunior on Jan 22, 2023 21:28:14 GMT -5
Thanks everyone I'll have a look at the links.
|
|