Deleted
Joined: January 1970
Posts: 0
|
Post by Deleted on Sept 11, 2016 1:08:05 GMT -5
Hi Guys, well the over night soak did the job, the injectors are all clean now. Engine is back together and back in the bike..... Few more days work and i hope to be ready to test All the best Andy
|
|
|
Post by racket on Sept 12, 2016 1:00:27 GMT -5
Hi Andy
Fast work :-)
Cheers John
|
|
Deleted
Joined: January 1970
Posts: 0
|
Post by Deleted on Sept 18, 2016 14:49:02 GMT -5
Hi Guys
its not taken as long as expected, but all back together and working
|
|
|
Post by Johansson on Sept 18, 2016 15:20:30 GMT -5
Nice one Andy!
One question though, why does it take almost one and a half minute before the bendix deattach the compressor nut? Does it stick to the compressor nut after the engine has started or do you keep the starter running for that long?
I preheat the JU-01 for roughly 5 seconds with propane before cranking up the rotor and applying idle fuel pressure, works like a charm.
Cheers! /Anders
|
|
Deleted
Joined: January 1970
Posts: 0
|
Post by Deleted on Sept 19, 2016 6:31:04 GMT -5
Nice one Andy! One question though, why does it take almost one and a half minute before the bendix deattach the compressor nut? Does it stick to the compressor nut after the engine has started or do you keep the starter running for that long? I preheat the JU-01 for roughly 5 seconds with propane before cranking up the rotor and applying idle fuel pressure, works like a charm. Cheers! /Anders Hi , the bendix is timed to come off after 25 seconds :-) will be taking it back to 20 seconds now i have got it all working again, the fuel ramps up over 10 seconds and the starter motor takes 15 seconds to get to full speed. Some times it does not latch back as it should and gets dragged a little bit, but now worked out a better way to latch it back..... it dragging has never caused any issue it just rubs a little on the O ring The preheat will be sped up, was just being a little slow that day :-) lots to worry about All The Best Andy
|
|
Deleted
Joined: January 1970
Posts: 0
|
Post by Deleted on Jan 10, 2017 18:34:57 GMT -5
Hi Guys
Not much going off, working on van to take me, kart and bike to the track. Just a little video of how things are going
And this is one a friend did for me
All Best Andy
|
|