soldier9
New Member
Joined: March 2017
Posts: 2
|
Post by soldier9 on Mar 11, 2017 12:38:30 GMT -5
Here is a pic of the basic thermocouple/pressure transducer "boost" monitor ecu I made for my turboshaft in progress. It is based around an Arduino Mega and I got the sensors off of ebay, and the thermocouple breakout board from adafruit. i
|
|
soldier9
New Member
Joined: March 2017
Posts: 2
|
Post by soldier9 on Mar 11, 2017 12:45:01 GMT -5
Hey am interested in making one of these arduino for my homemade rc turbine. Can you send me a drawing or a step by step video on how to hook it up.help will be most appreciated. Email me at keron_mcpherson@hotmail.com
|
|
jetpr
New Member
Joined: April 2017
Posts: 3
|
Post by jetpr on Apr 29, 2017 21:31:19 GMT -5
Hi I have a ECU for micro turbines using a picmicro chips and works
|
|
microturbine711
New Member
Instagram @micro_turbine_711
Joined: April 2017
Posts: 5
|
Post by microturbine711 on May 29, 2017 9:43:55 GMT -5
What a great thread. I'm not sure where Admin is at with adding an additional channel for logic controllers or electronics, but it appears that the group has a strong background with the subject matter.
My military background started with Aviation electronics and I'm in the design phase of building an autonomous controlled/monitored system for the MGT-01 project. I'm undecided with the hardware but I would suspect it will be open source components.
Might be easier to set up individual project threads with links to schematics/code embedded. This way the projects don't overlap and bogg down the flow of advice or share.
~Ty
|
|
|
Post by Richard OConnell on Jun 4, 2017 7:39:41 GMT -5
microturbine711 I could still set this additional channel up if there was enough interest. For now, I'm leaning towards avoiding channel bloat where new users are overwhelmed by the number of options.
|
|