|
Post by stoffe64 on Oct 19, 2011 8:43:37 GMT -5
Hello all! Im very confused now,i had these data about A holset Hx60,which said that the comp wheel Is 76mm inducer and the turbine wheel is 90mm Well,after taken off the housings to measure I get totally confused with my math!? the comp wheel inducer is 76mm as stated But the turbine wheel exducer is 86mm(nothing strange With that)But the maths tell me that that was an even Worse combination for a turbine engine! Someone please help me out here to calculate! best regards/stephan
|
|
|
Post by racket on Oct 19, 2011 16:01:49 GMT -5
Hi Stephan
76/86 is a good combination , start building :-)
Cheers John
|
|