Chuks
Senior Member
Joined: August 2015
Posts: 498 
|
Post by Chuks on Feb 5, 2023 0:23:58 GMT -5
Setting up a mini factory for car fender stamping,
|
|
Chuks
Senior Member
Joined: August 2015
Posts: 498
|
Post by Chuks on Feb 5, 2023 0:30:37 GMT -5
Hello everyone
Am glad to see where to post this.
I have been searching through the internet for what is required for setting up a mini factory for a car fender manufacturing.
Please I will need to know what and what are required and where to buy them.
1) A laser cutter with working area of about 1,300mm to 1,500mm well be needed. (Don’t know where to buy it from)
2) a mold will be need (don’t know where to get it done)
Other tools and machines you think will be needed I will like to know them please.
Thanks for your support
|
|
slittlewing
Senior Member
Joined: November 2017
Posts: 458
|
Post by slittlewing on Feb 6, 2023 16:02:33 GMT -5
If you are talking about steel panels, you would need a very expensive huge press like this, plus the steel dies
|
|
Chuks
Senior Member
Joined: August 2015
Posts: 498
|
Post by Chuks on Feb 7, 2023 17:54:21 GMT -5
Thanks for the reply.
We are making the press locally, it not going to be that big since it’s only fenders we will be making.
I need to know how to go about getting the die.
The fender will be for a 2005 Toyota Corolla.
Thanks.
|
|
dieselguy86
Veteran Member
Joined: September 2014
Posts: 186
|
Post by dieselguy86 on Feb 11, 2023 7:24:28 GMT -5
You will have to find a tool and die maker to make one that fits in your press.
|
|
Chuks
Senior Member
Joined: August 2015
Posts: 498
|
Post by Chuks on Feb 12, 2023 0:04:03 GMT -5
You will have to find a tool and die maker to make one that fits in your press. Please I need one, I have no information on that. I have searched online but didn’t see any. How do I go about it? I will need help on who is going to make the tool and die. I need them standard then I will build the press to match the die. Thanks. |
|
