Post by praendy2203 on Aug 15, 2023 15:26:34 GMT -5
Hi,
got a turbine for very small money and some missing parts.
Its an AMT Mercury with ~90N thrust.
The housing was missing and the bearings were in bad condition.
Also a flange from the housing to the ngv was made.
I used a 100mm od stainless chimney tubing to make the housing.
After I bought the little engine it was clear, there must be an afterburner installed.
I will use the engine in a rc jet.
Some videos will follow😊
Cheers Andy
got a turbine for very small money and some missing parts.
Its an AMT Mercury with ~90N thrust.
The housing was missing and the bearings were in bad condition.
Also a flange from the housing to the ngv was made.
I used a 100mm od stainless chimney tubing to make the housing.
After I bought the little engine it was clear, there must be an afterburner installed.
I will use the engine in a rc jet.
Some videos will follow😊
Cheers Andy
