|
|
Post by racket on Jun 16, 2015 23:19:46 GMT -5
|
|
|
|
Post by racket on Jun 16, 2015 23:41:20 GMT -5
Abbreviations   |
|
|
|
Post by racket on Jun 16, 2015 23:46:17 GMT -5
Oil requirements  |
|
|
|
Post by racket on Jun 16, 2015 23:56:19 GMT -5
Combustion Chamber ( Combustor)   |
|
|
|
Post by racket on Jun 16, 2015 23:58:16 GMT -5
|
|
|
|
Post by racket on Jun 17, 2015 0:02:17 GMT -5
Ignition  |
|
|
|
Post by racket on Jun 17, 2015 0:04:27 GMT -5
Starters  |
|
turbomarc
Junior Member
Joined: May 2015
Posts: 56 
|
Post by turbomarc on Jun 17, 2015 0:23:16 GMT -5
Thanks Sal for the pics/graphics Is Sal still around, or on this forum?? I remember his website from many years back with the CAD images, but i can't seem to find it anymore, in particular the CAD image where he was going to do a twin turbine, single combustion chamber set up. Thanks for sharing John. Cheers, Marc. |
|
|
|
Post by racket on Jun 17, 2015 1:04:15 GMT -5
Hi Marc
I'll try to get some of the other bits up when I can .
I'm not sure what Sal is doing these days , he contributed some nice stuff on DIY Site .
Cheers
John
|
|
|
|
Post by racket on Jun 17, 2015 1:08:10 GMT -5
Jet Pipes and Nozzles   |
|
|
|
Post by racket on Jun 17, 2015 1:10:00 GMT -5
Compressor Flows   |
|
|
|
Post by racket on Jun 17, 2015 1:12:12 GMT -5
Thrust  |
|
|
|
Post by racket on Jun 17, 2015 1:13:42 GMT -5
Fuel Consumption  |
|
|
|
Post by racket on Jun 17, 2015 1:15:46 GMT -5
|
|
|
|
Post by pitciblackscotland on Jun 17, 2015 2:23:00 GMT -5
Hi John, You have been busy  thanks for posting this info. As for Marc asking about Sals CAD images of the twin turbine, single combustion chamber set up here you go. Cheers, Mark.    |
|
thanks for posting this info. As for Marc asking about Sals CAD images of the twin turbine, single combustion chamber set up here you go.