|
Post by pitciblackscotland on Oct 25, 2021 4:40:14 GMT -5
OK thanks mate
|
|
|
Post by pitciblackscotland on Oct 24, 2021 4:50:08 GMT -5
I look at the last photo 14-30DC would that be the input volts
|
|
|
Post by pitciblackscotland on Oct 23, 2021 21:48:24 GMT -5
|
|
|
Post by pitciblackscotland on Oct 21, 2021 23:25:53 GMT -5
Hi John, Look like a nice easy start there Next time are you going to flex it's muscles Cheers, Mark.
|
|
|
Post by pitciblackscotland on Oct 21, 2021 20:32:00 GMT -5
Good luck John Cheers, Mark.
|
|
|
Post by pitciblackscotland on Oct 10, 2021 16:03:38 GMT -5
Nice run on the kart there mate Love the echo of the afterburner Cheers, Mark.
|
|
|
Post by pitciblackscotland on Oct 1, 2021 23:30:51 GMT -5
Hi John, good luck with the test run That ignition system sounds sweet Cheers, Mark.
|
|
|
Post by pitciblackscotland on Sept 22, 2021 3:03:40 GMT -5
Hi Mark She a big girl Cheers John Nice one John The bellmouth is nice and shiny Are you going to fix the engine on the stand the same way as the fat boy Cheers, Mark.
|
|
|
Post by pitciblackscotland on Sept 21, 2021 21:23:08 GMT -5
Hi John, Nice shiny new parts there Did you feel the tremor were you are today My house was shaking for ~10 seconds Cheers, Mark.
|
|
|
Post by pitciblackscotland on Sept 3, 2021 1:59:13 GMT -5
Hi John, Looking good I like that large pressure gauge Get some Brasso on that bellmouth Cheers, Mark.
|
|
|
Post by pitciblackscotland on Aug 30, 2021 3:41:48 GMT -5
Thanks Anders, Yep i am watching those vids you just uploaded will save them for future reference Do you still have test run of the JU-01 when you had a scale to measure the thrust Also the fist ride you did on the frozen lake you had the rear camera view on the bike Cheers, Mark.
|
|
|
Post by pitciblackscotland on Aug 29, 2021 22:31:05 GMT -5
Hi Anders, Good to see you back again I miss those vids of the test test starts you done on the JU-01 engine And yes i am still working on the trike build, done a bit so far. Cheers, Mark.
|
|
|
Post by pitciblackscotland on Aug 22, 2021 19:36:52 GMT -5
Hi Cullen, your in luck i have six nozzles also photos of the boss i machine up to take the nozzle, there is a pilot hole at the other end. 19mm round stock and the length is 45mm can make longer or shorter if need be. Cheers, Mark.
|
|
|
Post by pitciblackscotland on Aug 22, 2021 6:48:48 GMT -5
Thank you very much Mark! Those 7.5 gph injectors are the biggest you have? I’ve been looking around for a 20ish injector..or multiple injectors. How many 7.5s do you have? I might be able to use 3 per engine to meet my “goal”. I’d honestly need 6 if that’s the case. Thanks, Cullen Yeah that's the biggest i have, i think i have six will have a look tomorrow. Cheers, Mark.
|
|
|
Post by pitciblackscotland on Aug 22, 2021 2:18:09 GMT -5
Hi Cullen, I have a box of nozzles i can sell a nozzle to you. Have a look and see if there is a nozzle you can use. I can machine up the boss out of some round stock and drill and tap a hole to screw the nozzle into if you need that as well. I have a boss i machine up somewhere. I'll post a photo when i find it. Cheers, Mark.
|
|