|
|
Post by waviation37 on Apr 7, 2019 7:45:28 GMT -5
Hey I'm new to the forum, and I'm building a Nimbus cut-away for my thesis. Is there anyone with info about how I can get the centrifugal compressor apart. I have the roller bearing out and I don't want to damage the compressor vanes. If anyone has info or documentation about the Nimbus it would be Greatly Appreciated!
thanks
Here are a few pics of the Nimbus I inherited.
|
|
|
|
Post by stoffe64 on Apr 8, 2019 13:28:46 GMT -5
Hello there!
You can start in a proper way by purchasing an overhaul manual!....that can save you alot of greif and agony AND money....because you do the work in the correct way.
Chris krug is a nimbus guy in this forum
Cheers Stephan!
|
|
jetric
Veteran Member
Joined: December 2014
Posts: 132 
|
Post by jetric on Apr 8, 2019 17:26:12 GMT -5
Hey I'm new to the forum, and I'm building a Nimbus cut-away for my thesis. Is there anyone with info about how I can get the centrifugal compressor apart. I have the roller bearing out and I don't want to damage the compressor vanes. If anyone has info or documentation about the Nimbus it would be Greatly Appreciated! thanks Hi waviation37, Can you send me your Email address on a PM to me, then I can Email you the complete Nimbus engine manual. Jetric. |
|
|
|
Post by waviation37 on Apr 10, 2019 3:14:14 GMT -5
Thanks Jetric
I have bits and pieces of a manual, but very little overhaul or tear down information. My manual is just about changing filters & light maintenance. Any information you have would be greatly appreciated.
|
|
|
|
Post by waviation37 on Apr 10, 2019 3:18:27 GMT -5
Hey Stoffe64 thanks for the heads-up. I have been in contact with Chris, and he directed me to the forum. I am not working without a manual, but I have had a lot of trouble finding good documentation on the Nimbus.
Thanks
Waviation37
|
|
