hosedup
Junior Member
Joined: October 2019
Posts: 68
|
Post by hosedup on May 19, 2020 11:15:11 GMT -5
I know this question is highly subjective and everyone will have a different answer. Only looking for slightly better than a wild guess.
Worst case scenario, how many gallons per hour would an engine like what were making here consume? Without afterburner? With afterburner?
I'm cooking a couple ideas and am looking for some starting points.
|
|
|
Post by racket on May 19, 2020 18:59:58 GMT -5
As a general rule compressors flow air at ~12 lbs/minute/square inch of inducer area , therefore it'll require ~12 lbs of fuel/hour/square inch of inducer , if running at an overall 60:1 A/F ratio and safe temperatures .
eg, a 3" dia inducer has ~7 sq ins of area , 7 X 12 = 84 lbs of air /minute , so ~84 lbs/hour of fuel , kero at ~6.7 lbs/US gallon , which means ~12.5 US gph of fuel without afterburn , with afterburn ~50 gph
Hope this helps
Cheers John
|
|