Kart lifter build

[ausjet]

Hi guys, some may be interested in the kart lifter I’m making. I’ll be able to load and unload the kart (with afterburner fitted) from the trailer by myself plus have it lifted to a suitable height to work on. The handle is removable so it doesn’t take much space in the trailer. The main frame is 40x40x1.6mm, tressles are 25x25x1.6mm with the rest made out of whatever offcuts I had lying around.
I did a bit of cross bracing today and fully welded the rest of it. I might beef up the pivot a bit more to prevent twisting when pushing it over rough ground.

[racket]

Very nice :-)

Much easier working on a kart at that height rather than crawling around on the ground