noshell
Junior Member
![*](//storage.proboards.com/forum/images/stars/star.png)
Joined: January 2020
Posts: 88
|
Post by noshell on May 28, 2024 8:53:18 GMT -5
Hi guys I'm continuing my in tank oil pump build and I will be wanting a seal for the input shaft (this wont be immersed in oil). What are typical oil temps from a turbocharger based jet... its literally smoking when it comes out of mine, I've never measured the temp. The most common seals seem to be nitrile.
|
|
richardm
Senior Member
![*](//storage.proboards.com/forum/images/stars/star.png) ![*](//storage.proboards.com/forum/images/stars/star.png)
Joined: June 2022
Posts: 326
|
Post by richardm on May 28, 2024 10:47:57 GMT -5
|
|
richardm
Senior Member
![*](//storage.proboards.com/forum/images/stars/star.png) ![*](//storage.proboards.com/forum/images/stars/star.png)
Joined: June 2022
Posts: 326
|
Post by richardm on May 28, 2024 10:50:28 GMT -5
|
|
noshell
Junior Member
![*](//storage.proboards.com/forum/images/stars/star.png)
Joined: January 2020
Posts: 88
|
Post by noshell on May 28, 2024 11:57:49 GMT -5
Up to 300c, much higher. Nice. Thankyou
|
|