|
Post by twenglish1 on May 11, 2012 22:12:09 GMT -5
I have decided i will be selling my jet go kart. Runs great! Burns diesel or kerosene Instrumentation includes: Oil pressure, oil temperature, battery voltage, exhaust gas temperature, and turbo boost pressure. High pressure fuel injection, 2 fuel pumps, fuel pressure is around 200 - 250 psi. uses an oil furnace nozzle for fuel injection, i currently have a 6 gallon per hour nozzle in it, turbo boost at full throttle is about 15 - 20 PSI. (i will also include: 1, 2, 3, 4, 5, and two 10 gallon per hour nozzles) Not much information on the turbo, 3 inch inducer, came off of a diesel bull dozer or something. Recently rebuilt and balanced. Using a power steering pump for oil system, includes oil filter and oil cooler that kicks on when the temperature reaches a certain point. filter is brand new. I will add some more pictures upon request. I am living near Pittsburgh, PA Contact me if you are interested! I am asking $1,500 but that is fully negotiable! Attachments:
|
|
|
Post by turbochris on May 12, 2012 8:52:27 GMT -5
that's not a bad deal. how do you start it? more pics and some video?
|
|
|
Post by twenglish1 on May 12, 2012 16:39:30 GMT -5
I have been using a large shop vac set to blow to start it, i have also had success with a gas leaf blower. basically the start-up sequence goes: igniter on, fuel pumps on, oil pump on, spool up turbo with shopvac and slowly increase throttle until ignition, then while holding the shop vac on the turbo keep throttling up until self sustaining.
|
|