|
|
Post by racket on Feb 2, 2017 15:37:46 GMT -5
Yep , I use that brand , generally the "silver" colour so my steel bits look like stainless ;-)
|
|
|
|
Post by stoffe64 on Feb 3, 2017 11:09:52 GMT -5
A guy at work recommended to use stove paint,such used on hot woodburning stoves
What do you guys here think of such?
Cheers /stephan
|
|
|
|
Post by Johansson on Feb 3, 2017 14:28:47 GMT -5
A guy at work recommended to use stove paint,such used on hot woodburning stoves What do you guys here think of such? Cheers /stephan I think you should build the engine first and then worry about the paint job.  |
|
|
|
Post by stoffe64 on Feb 3, 2017 14:38:28 GMT -5
Never Hurt to protect against rusting.... I thought!
|
|
|
|
Post by Johansson on Feb 3, 2017 15:35:16 GMT -5
Never Hurt to protect against rusting.... I thought! I am just pulling your leg Stoffe. |
|
|
|
Post by racket on Feb 3, 2017 16:25:49 GMT -5
Hi Stephan
I've used "wood burner" paint on hot motorcycle bits in the past , but probably not as effective as the VHT spray can
Cheers
John
|
|
|
|
Post by stoffe64 on Feb 4, 2017 15:33:12 GMT -5
Never Hurt to protect against rusting.... I thought! I am just pulling your leg Stoffe. Jamen, that i have understood Anders! |
|
|
|
Post by stoffe64 on Feb 4, 2017 15:43:16 GMT -5
I am just pulling your leg Stoffe. Jamen, that i have understood Anders! |
|
|
|
Post by stoffe64 on Feb 4, 2017 16:17:05 GMT -5
Hi Stephan I've used "wood burner" paint on hot motorcycle bits in the past , but probably not as effective as the VHT spray can Cheers John Thanks for sharing that information John, not that easy to find vht paint here in sweden, Cheers /stephan |
|
|
|
Post by stoffe64 on May 3, 2017 12:43:59 GMT -5
A bit of an update, been working some on the engine Cheers /stephan  |
|
|
|
Post by Johansson on May 3, 2017 15:56:14 GMT -5
Looking good Stephan!
|
|
mitch
Senior Member
Joined: August 2014
Posts: 285 
|
Post by mitch on May 3, 2017 17:09:41 GMT -5
Looks good! I like how compact it is
|
|
|
|
Post by racket on May 3, 2017 17:26:33 GMT -5
Hi Stephan
Good to see you're getting some work done on the engine :-)
Cheers
John
|
|
|
|
Post by stoffe64 on May 3, 2017 17:45:03 GMT -5
Thanks guys!
Its just a mockup to see how the air delivery fits, no welding yet...The flanges are water cut by a local company, that compressor housing got welded by a relative to my work colleague.
The difficult part is still there to be fixed,the combustor liner i talk about
Fuel presentation (fuel nozzle), install the igniter plug etc etc
But its getting there slowly!
Cheers /stephan
|
|
ripcrow
Veteran Member
Joined: December 2015
Posts: 114
|
Post by ripcrow on May 4, 2017 4:58:42 GMT -5
Is that turbo one with the electronic variable vanes originally
|
|
