|
Post by pitciblackscotland on Nov 8, 2013 15:27:18 GMT -5
Hi all, Well it's time for me to start to build a turbine engine from scratch well almost I was having a good chat to John the other week and i said me and Andrew have some casting done a while ago for a 9/94 engine maybe it's time for me to start machining up the parts and John said why not finish this one i have sitting on my desk . And i said yes please
|
|
|
Post by pitciblackscotland on Nov 8, 2013 15:35:41 GMT -5
|
|
|
Post by pitciblackscotland on Nov 8, 2013 15:43:11 GMT -5
|
|
|
Post by pitciblackscotland on Nov 8, 2013 16:00:35 GMT -5
|
|
|
Post by pitciblackscotland on Nov 8, 2013 16:04:39 GMT -5
LOL I'll try and squeeze in between this project with all the other projects i have on. I had some time to cut up some ss sheets for the flame tube.
|
|
|
Post by racket on Nov 8, 2013 21:15:46 GMT -5
Hi Mark
You're getting into it :-)
Good to see something happening with the bits , its not good having them sitting around doing nothing ..................I really should find a use for Fat Mumma , she looks nice sitting on my test stand , but its a waste that she's not doing something .
Cheers John
|
|
|
Post by pitciblackscotland on Nov 9, 2013 1:01:00 GMT -5
Hi John, yep i need to pull my finger out and get some of these projects up and running. LOL i have about 2,000 liters of heating oil to burn - ))). I'm sure you will find a use for her maybe another bike . Cheers, Mark..
|
|
|
Post by racket on Nov 9, 2013 17:57:48 GMT -5
Hi Mark
LOL, maybe a "postie bike" with her riding pillion ;-)
You'll need to build a Skuld to burn all that fuel.
Cheers John
|
|
|
Post by enginewhisperer on Nov 19, 2013 6:12:54 GMT -5
I am happy to put Fat Mumma on some inappropriate vehicle In all seriousness, I just obtained a free Fiat X1/9....
|
|
|
Post by pitciblackscotland on Nov 22, 2013 0:28:58 GMT -5
|
|
|
Post by pitciblackscotland on Nov 22, 2013 0:35:31 GMT -5
|
|
|
Post by pitciblackscotland on Nov 22, 2013 0:40:39 GMT -5
Grinded down the threaded boss which was protruding out this will be the fuel drain port. Cheers, Mark -
|
|
|
Post by pitciblackscotland on Dec 13, 2013 1:30:22 GMT -5
|
|
|
Post by pitciblackscotland on Dec 13, 2013 1:37:05 GMT -5
|
|
|
Post by pitciblackscotland on Dec 13, 2013 1:46:32 GMT -5
I will heat the sleeve with the heat gun and the diffuser housing left in the freezer for a while this will allow me to press the diffuser housing into the sleeve. Cheers, Mark.
|
|