|
Post by racket on Jun 16, 2015 23:19:46 GMT -5
|
|
|
Post by racket on Jun 16, 2015 23:41:20 GMT -5
Abbreviations ![](http://s21.postimg.org/7cdf9k4s3/Abbreviations_1_Page_1.jpg) ![](http://s21.postimg.org/m9lwaki0j/Abbreviations_1_Page_2.jpg)
|
|
|
Post by racket on Jun 16, 2015 23:46:17 GMT -5
Oil requirements ![](http://s21.postimg.org/4sqz6xvzn/No_02_Oil_Requirements_1_Page_1.jpg)
|
|
|
Post by racket on Jun 16, 2015 23:56:19 GMT -5
Combustion Chamber ( Combustor) ![](http://s17.postimg.org/i2l2c7b3f/No_03_Combustion_Chamber_2_Page_1.jpg) ![](http://s17.postimg.org/itidvq2uj/No_03_Combustion_Chamber_2_Page_2.jpg)
|
|
|
Post by racket on Jun 16, 2015 23:58:16 GMT -5
|
|
|
Post by racket on Jun 17, 2015 0:02:17 GMT -5
Ignition ![](http://s21.postimg.org/t1zaa4pwz/No_05_Ignition_Page_1.jpg)
|
|
|
Post by racket on Jun 17, 2015 0:04:27 GMT -5
Starters ![](http://s14.postimg.org/yeian75yl/No_06_Starters_Page_1.jpg)
|
|
turbomarc
Junior Member
![*](//storage.proboards.com/forum/images/stars/star.png)
Joined: May 2015
Posts: 56
|
Post by turbomarc on Jun 17, 2015 0:23:16 GMT -5
Thanks Sal for the pics/graphics Is Sal still around, or on this forum?? I remember his website from many years back with the CAD images, but i can't seem to find it anymore, in particular the CAD image where he was going to do a twin turbine, single combustion chamber set up. Thanks for sharing John. Cheers, Marc.
|
|
|
Post by racket on Jun 17, 2015 1:04:15 GMT -5
Hi Marc
I'll try to get some of the other bits up when I can .
I'm not sure what Sal is doing these days , he contributed some nice stuff on DIY Site .
Cheers John
|
|
|
Post by racket on Jun 17, 2015 1:08:10 GMT -5
Jet Pipes and Nozzles ![](http://s21.postimg.org/e9qw7sshf/No_07_Jet_Pipes_and_Nozzles_Page_1.jpg) ![](http://s21.postimg.org/m3rht70ab/No_07_Jet_Pipes_and_Nozzles_Page_2.jpg)
|
|
|
Post by racket on Jun 17, 2015 1:10:00 GMT -5
Compressor Flows ![](http://s23.postimg.org/61iwbxs07/No_08_Compressor_Flows_Page_1.jpg) ![](http://s23.postimg.org/vyckojvnr/No_08_Compressor_Flows_Page_2.jpg)
|
|
|
Post by racket on Jun 17, 2015 1:12:12 GMT -5
Thrust ![](http://s15.postimg.org/sbrs6lhmv/No_09_Thrust_Page_1.jpg)
|
|
|
Post by racket on Jun 17, 2015 1:13:42 GMT -5
Fuel Consumption ![](http://s13.postimg.org/u7pjqzmf7/No_10_Fuel_Consumption_Page_1.jpg)
|
|
|
Post by racket on Jun 17, 2015 1:15:46 GMT -5
|
|
|
Post by pitciblackscotland on Jun 17, 2015 2:23:00 GMT -5
Hi John, You have been busy ![:)](//storage.proboards.com/forum/images/smiley/smiley.png) thanks for posting this info. As for Marc asking about Sals CAD images of the twin turbine, single combustion chamber set up here you go. Cheers, Mark. ![](http://s24.postimg.org/lvnla95k1/Jet_Twin_2_1.jpg) ![](http://s24.postimg.org/iarpr110h/Jet_Twin_2_2.jpg) ![](http://s24.postimg.org/q28fpl55t/Jet_Twin_2_3.jpg)
|
|