|
|
Post by firewood8866 on Sept 12, 2015 8:23:02 GMT -5
Hello---I am new to gas turbines. I just purchased an Airesearch GTC85-71A out of a scrap yard for $260.00. I appears to have all of the control lines and accessories but has damage to a couple of the cast air tubes between the primary side and secondary that may not be repairable. Does anyone know of a source for used parts in the US? I would also be interested in any comments or information that anyone would like to contribute. Thanks-Doug from northern Minnesota
|
|
|
|
Post by pitciblackscotland on Sept 13, 2015 9:26:48 GMT -5
|
|
|
|
Post by firewood8866 on Sept 14, 2015 7:24:07 GMT -5
Hello Mark----Thank you for the good information. I have several manuals coming from EsscoAircraft that should help. I am going to attempt to TIG weld the broken pieces if I can`t find replacements at a reasonable price. I see that there is an auction in Texas this week that has a bunch of GTC85 stuff but I need to know what is interchangeable between the different dash model numbers. Lots to learn. Thanks again-Doug
|
|
|
|
Post by pitciblackscotland on Sept 14, 2015 15:11:16 GMT -5
Hi Doug,
No worries good luck with the repairs.
Cheers,
Mark.
|
|
