gaetan
New Member
Joined: April 2011
Posts: 6
|
Post by gaetan on Apr 14, 2011 10:21:29 GMT -5
Hi there, Does anyone knows where i can find/buy gtp30-150 APU engines... I need 4 of those to complete my project. Any tips are welcome... Gaetan
|
|
|
Post by jetpropellerlabs on Apr 24, 2011 16:35:39 GMT -5
Bruce at Avon Aero had several last time I talked to him.
|
|
gaetan
New Member
Joined: April 2011
Posts: 6
|
Post by gaetan on Apr 28, 2011 16:13:52 GMT -5
I ordered 4 of them at Avon Aero...
|
|
wolfdragon
Senior Member
Joined: April 2011
Posts: 287
|
Post by wolfdragon on Apr 29, 2011 17:55:05 GMT -5
grins and giggles, how much did he have them for?
|
|
gaetan
New Member
Joined: April 2011
Posts: 6
|
Post by gaetan on May 1, 2011 10:23:57 GMT -5
2500$ in used condition and 7500$ in new condition
I bought 4 of them 3used 1new...and got a reduction...
reasonable price...
|
|
|
Post by Johansson on May 1, 2011 12:54:43 GMT -5
And the million dollar question is, what kind of project is it you are working on?
|
|
gaetan
New Member
Joined: April 2011
Posts: 6
|
Post by gaetan on May 2, 2011 14:33:27 GMT -5
I use those engines to build a solar thermal power plant. I found a way to make them run on hot clean air. Nothing special, even Leonardo Davinci knew how...
The first one I bought is running on jet-A1 in a test configuration. I added some components (outlet diffuser described in NASA documents from 30 years ago) and lowered the fuel consumption by approx 20%.
Now i need some high temperature heat exchangers for gas turbines. Problem is the 800°C, most existing ones don't meet these requirements.
|
|
|
Post by racket on May 2, 2011 18:05:54 GMT -5
Hi
LOL........you must have done a lot more than just add a diffusing exhaust to get a 20% reduction in fuel usage , a diffusing exhaust might pickup a couple of percentage points on turbine efficiency but thats about all .
800 deg C , gunna need stainless , have you looked at steam superheaters ??
Cheers John
|
|
gaetan
New Member
Joined: April 2011
Posts: 6
|
Post by gaetan on May 17, 2011 10:51:34 GMT -5
Indeed more was done than just that... love to talk about it, but it will have to wait until commercialized.
|
|