praendy2203
Veteran Member
Joined: August 2020
Posts: 183
|
Post by praendy2203 on Feb 19, 2024 5:30:43 GMT -5
Just some grinding required to get a better shape.
Andy
|
|
|
|
Post by racket on Feb 19, 2024 16:19:15 GMT -5
Hi Andy
Nice :-)
Cheers
John
|
|
praendy2203
Veteran Member
Joined: August 2020
Posts: 183
|
CPS 2022
Feb 20, 2024 0:37:20 GMT -5
via mobile
Post by praendy2203 on Feb 20, 2024 0:37:20 GMT -5
Hi John,
After having the piece in my hands, I am a bit concerned about the channel between the vanes.
They are almost parallel and only have a little nozzle effect.
I am thinking of rework the part to this shape.
Andy
|
|
praendy2203
Veteran Member
Joined: August 2020
Posts: 183
|
Post by praendy2203 on Feb 20, 2024 0:43:03 GMT -5
|
|
|
|
Post by racket on Feb 20, 2024 1:43:26 GMT -5
Hi Andy
Yep , and maybe round off the inlet end to provide a smoother flow .
Cheers
John
|
|
ripp
Veteran Member
I'm sorry, I don't speak english, so I torment you (and myself) with a translation program,Sorry
Joined: January 2013
Posts: 237
|
Post by ripp on Feb 20, 2024 2:05:23 GMT -5
Hi Andy,
I suspect the NGV angle is 30°, isn't that a bit too much?
Ralph
|
|
praendy2203
Veteran Member
Joined: August 2020
Posts: 183
|
Post by praendy2203 on Feb 20, 2024 2:55:08 GMT -5
Hi Ralph, the angle should be 27° Maybe this pic is better. Andy  |
|
