|
|
Post by wannabebuilderuk on Oct 14, 2020 19:15:00 GMT -5
Man that sure is a beauty.. Nice job!
|
|
|
|
Post by racket on Oct 14, 2020 19:29:05 GMT -5
Very creative ........nice :-)
|
|
|
|
Post by azwood on Oct 28, 2020 17:43:56 GMT -5
Got a reduction box and huge 80t rear spocket on the way with a 14t front I’m getting 140kph I’m happy with that as a starting point we’ll see how it goes
|
|
|
|
Post by azwood on Oct 28, 2020 17:48:55 GMT -5
 Here’s the box nothing to special I’m hoping with some oil spray jets and bleed air I can keep it alive any thoughts on the lubrication would be appreciated |
|
|
|
Post by azwood on Oct 28, 2020 17:51:32 GMT -5
Think the box is rated for 30kw but don’t think the type of power I’ll make is harsh on the driveline
|
|
|
|
Post by wannabebuilderuk on Oct 28, 2020 18:47:41 GMT -5
Here’s the box nothing to special I’m hoping with some oil spray jets and bleed air I can keep it alive any thoughts on the lubrication would be appreciated Is it a sealed case design? I'm thinking if it is then you just fill it with oil to about 1/3 and that does the job. If not you could setup a nozzle and an external small pump to constantly drip oil over the gears which gets pumped in a loop. |
|
|
|
Post by azwood on Oct 28, 2020 19:03:01 GMT -5
Here’s the box nothing to special I’m hoping with some oil spray jets and bleed air I can keep it alive any thoughts on the lubrication would be appreciated Is it a sealed case design? I'm thinking if it is then you just fill it with oil to about 1/3 and that does the job. If not you could setup a nozzle and an external small pump to constantly drip oil over the gears which gets pumped in a loop. Yep I already have an outlet for the power turbine and a return fitting in the oil tank for that so may as well do it I also have bleed air to cool the turbine bearing |
|
|
|
Post by racket on Oct 28, 2020 19:37:48 GMT -5
Tractor PTO ??
|
|
|
|
Post by azwood on Oct 28, 2020 20:08:20 GMT -5
Yeah got it cheap it a speed increase 540 in 2015 out but I’ll run it backwards |
|
|
|
Post by azwood on Oct 28, 2020 20:10:11 GMT -5
It’s a spur gear type so hopefully I can make it work somehow
|
|
|
|
Post by racket on Oct 28, 2020 21:42:04 GMT -5
Should be OK, cast iron casing ??
|
|
|
|
Post by azwood on Oct 28, 2020 23:17:19 GMT -5
Should be OK, cast iron casing ?? Yeah cast iron case |
|
|
|
Post by racket on Oct 28, 2020 23:55:40 GMT -5
Is that the one on Ebay at $245 ?
|
|
|
|
Post by azwood on Oct 29, 2020 1:24:52 GMT -5
Is that the one on Ebay at $245 ? Haha you’ve been on to all the bargains yep |
|
|
|
Post by racket on Oct 29, 2020 2:30:03 GMT -5
|
|
