|
|
Post by racket on Nov 10, 2020 3:04:06 GMT -5
Yeh , maybe balls on the input shaft , the output should be OK
|
|
|
|
Post by azwood on Nov 13, 2020 0:08:10 GMT -5
 Just received the monster rear sprocket for the bike 80t to go with the 10t front |
|
|
|
Post by azwood on Nov 23, 2020 19:47:11 GMT -5
Starting to get things mocked up with the drive line still can only get 10/1 to to wheel a little tall think that puts me in the 300kph range which I don't think me engine would push might need a jack shaft with further reduction   |
|
|
|
Post by racket on Nov 23, 2020 21:44:51 GMT -5
Hi Aaron
Thats one big sprocket
The freepower should produce 80% of potential power at 50% potential RPM , so you'll get mobile :-)
Cheers
John
|
|
|
|
Post by azwood on Nov 23, 2020 21:53:46 GMT -5
Hi Aaron Thats one big sprocket The freepower should produce 80% of potential power at 50% potential RPM , so you'll get mobile :-) Cheers John Yep all 330mm of it.guess I'll start with what I have and do some testing on my enertia dyno maybe then I'll get more enspired to change it |
|
|
|
Post by azwood on Nov 23, 2020 21:55:45 GMT -5
If I get decent power to Cruze and get up my steep driveway that's good for now
|
|
|
|
Post by azwood on Dec 1, 2020 21:23:42 GMT -5
Almost done the intake screen I tried to get a 50s turbo jet look.  |
|
|
|
Post by azwood on Dec 6, 2020 21:05:45 GMT -5
The trimmer has but finished my seat he does a great job.  |
|
|
|
Post by racket on Dec 6, 2020 21:46:00 GMT -5
NICE
|
|
|
|
Post by azwood on Dec 8, 2020 0:07:02 GMT -5
Got a new hall effect throttle control as Andrew suggested.itz a very nice unit from untronics not a cheap know off I'll still have a ball valve shut off in case I get any ohh s#it moments but it has a very nice smooth action and it's robust I'll let you guys know how it goes.  |
|
|
|
Post by azwood on Dec 8, 2020 0:13:42 GMT -5
Some spec's  |
|
|
|
Post by azwood on Dec 8, 2020 0:19:16 GMT -5
As it's hard to find a nice smooth controller here's how to get it there's lots of other cool stuff on their web site too worth a look.  |
|
|
|
Post by azwood on Dec 8, 2020 4:10:50 GMT -5
Got my seat new on  |
|
|
|
Post by wannabebuilderuk on Dec 8, 2020 4:12:05 GMT -5
|
|
|
|
Post by azwood on Dec 8, 2020 4:38:13 GMT -5
Been There brought about 5 of those I just either fried them or they didn't have a nice linier feel The went from 0 to 100 in like 1/3 of a turn |
|
