Toni
Member
Joined: December 2020
Posts: 26
|
Post by Toni on Dec 8, 2020 6:41:43 GMT -5
What is that?
|
|
|
Post by wannabebuilderuk on Dec 8, 2020 8:04:29 GMT -5
The one I bought has a nice feel, goes 0-100 in just over a full turn, I'll see if it goes too hot but 40a constant and 60a burst should be fine for my 24v 27a motor running on 12v. Will just have to figure out a way to stop it going to 0 when running i.e setting the idle % but will get to that bridge when I do.
|
|
Toni
Member
Joined: December 2020
Posts: 26
|
Post by Toni on Dec 8, 2020 11:15:29 GMT -5
Sorry but I'm very green about this, what it do?
|
|
|
Post by wannabebuilderuk on Dec 8, 2020 17:35:47 GMT -5
It's called a pwm controller toni, pulse width modulation. Basically sends a pulses of power to the motor at a certain varying frequency to control the speed instead of being on or off. en.wikipedia.org/wiki/Pulse-width_modulation
|
|
|
Post by azwood on Jan 10, 2021 21:49:15 GMT -5
A while back I decided to bite the bullet and get a proper starter not cheap but a must for a machine that Starts on its owne no problems 127amp 48v 30.000 rpm job done
|
|
|
Post by racket on Jan 11, 2021 4:37:15 GMT -5
More info please
|
|
|
Post by azwood on Jan 11, 2021 17:40:21 GMT -5
|
|
|
Post by azwood on Jan 11, 2021 17:56:07 GMT -5
The motor was made for boats 1.5 to 2m it's 2kw should get the job done
|
|
|
Post by azwood on Jan 19, 2021 20:02:40 GMT -5
It's not jato related but thought some of you might like this resignator guitar I made alloy body wooden neck steel strings chev and ford hub caps for the cone and cover.
|
|
|
Post by azwood on Jan 31, 2021 22:02:14 GMT -5
Does anyone know why when I plug everything in the esc just beeps and the motor won't go
|
|
|
Post by azwood on Jan 31, 2021 23:51:37 GMT -5
Does anyone know why when I plug everything in the esc just beeps and the motor won't go Haha never mind I had the esc plugged into the in Port of the servo tester simple mistake because of tiny writing on the tester.wow this motor has some juice very impressive.
|
|
|
Post by wannabebuilderuk on Feb 1, 2021 5:22:30 GMT -5
Well you can't say that without showing us 😁
|
|
|
Post by azwood on Feb 1, 2021 17:44:52 GMT -5
Well you can't say that without showing us 😁 Hopefully the vid works this is with the battery running low
|
|
|
Post by azwood on Feb 1, 2021 19:41:07 GMT -5
My assistant is a quick study
|
|
|
Post by wannabebuilderuk on Feb 2, 2021 7:50:38 GMT -5
The vid loaded as an image Daddy's little helper ha
|
|