|
|
Post by pitciblackscotland on May 9, 2011 1:30:56 GMT -5
Hi Guys, I fitted the oil cooler, cooling fans and oil pump on the test stand. LOL a lot more work to do. Cheers, Mark.  Attachments:
|
|
|
|
Post by pitciblackscotland on May 9, 2011 1:36:35 GMT -5
Pic # 2 I got this heavy duty oil cooler from e bay, brand new built by garrett. Attachments:
|
|
|
|
Post by pitciblackscotland on May 9, 2011 1:44:41 GMT -5
Pic # 3 Attachments:
|
|
|
|
Post by pitciblackscotland on May 9, 2011 1:46:39 GMT -5
Pic #4 Attachments:
|
|
|
|
Post by pitciblackscotland on May 9, 2011 1:49:02 GMT -5
Pic # 5 Attachments:
|
|
|
|
Post by racket on May 9, 2011 4:10:44 GMT -5
Hi Mark
LOL.......nice oilpump ;-) ....................thought I should mention that the leak down drain from the pump should be a gravity drain to the oiltank , ...... ie , pump above oiltank , otherwise lube could leak back past the seal into the electric motor if theres too much lube head pressure.
Cheers
John
|
|
|
|
Post by pitciblackscotland on May 9, 2011 8:29:59 GMT -5
Hi John,
thanks for that, I was thinking to fit a small tank for the leak down drain tube from the pump but i think that wont work. I can move the oil pump no problemo.
Cheers,
Mark..
|
|
|
|
Post by Richard OConnell on May 9, 2011 12:21:38 GMT -5
Nice computer fans. Should've gotten the glowing ones  |
|
|
|
Post by racket on May 9, 2011 17:14:38 GMT -5
Hi Mark
Lifting it up a bit higher might be the best method ,.............. that new pump will easily suck up a foot or so :-)
Cheers
John
|
|
|
|
Post by Johansson on May 10, 2011 0:12:56 GMT -5
Best make sure to wear safety shoes then. ;D
|
|
|
|
Post by stoffe64 on May 13, 2011 9:52:45 GMT -5
yes,protective shoes with steel shell to protect the toes.....
|
|
jettoymaker
Junior Member
Joined: September 2010
Posts: 55
|
Post by jettoymaker on May 16, 2011 6:54:21 GMT -5
Hi Mark,
Unit looking good :-))
Can't wait to see it up and running
|
|
|
|
Post by Richard OConnell on May 29, 2011 21:18:55 GMT -5
GASP!! Zalman has stolen your design for your oil cooler! It would appear that they are using the technology to cool the RAM in computers. www.xoxide.com/zalman-zm-rc1000-ramcooler.htmlAlso the RAM in my computer may be running hot. |
|
|
|
Post by pitciblackscotland on May 30, 2011 5:41:39 GMT -5
Hi Richard,
heh heh heh, I don't know if this design will work i got these fans from a computer swap meet $ 4.00 each. Lol they had lots to chose from. Thanks for the link. I notice they have 11 blades as the ones i got have 7 blades.
Cheers,
Mark..
|
|
|
|
Post by pitciblackscotland on Jul 11, 2011 5:05:52 GMT -5
Hi Guys, It's been slow progress down here at the moment with me working, but i will have some time off and i can get back to work on the T 30 project. I started on the control box, and have just purchased another new toy ;D. Cheers, Mark... Attachments:
|
|
