|
Post by pitciblackscotland on Jul 29, 2013 7:37:21 GMT -5
|
|
|
Post by racket on Jul 29, 2013 16:49:39 GMT -5
Hi Mark
Looking good :-)
Shes a big lump of a beast
Cheers John
|
|
|
Post by pitciblackscotland on Jul 30, 2013 3:06:19 GMT -5
Hi Jonh, Hehehe shes a big old thing. I had to cut out a section on the test stand to make room for the 4inch tube. That steel donut that Andrew gave me work out perfect :-))
Cheers, Mark...
|
|
|
Post by pitciblackscotland on Aug 3, 2013 2:03:30 GMT -5
|
|
|
Post by pitciblackscotland on Aug 3, 2013 2:13:57 GMT -5
|
|
|
Post by pitciblackscotland on Aug 3, 2013 2:19:06 GMT -5
Just need to drill and tap some blind holes and machine up the shalf. Cheers, Mark.
|
|
|
Post by pitciblackscotland on Aug 6, 2013 22:54:41 GMT -5
|
|
|
Post by pitciblackscotland on Aug 6, 2013 23:01:19 GMT -5
Using a 100mm DIA pulley for testing may need a bigger DIA pulley Cheers, Mark .
|
|
|
Post by racket on Aug 7, 2013 4:24:47 GMT -5
Hi Mark
Heh heh , built to your usual heavy duty design standards , nice ;-)
Cheers John
|
|
|
Post by pitciblackscotland on Aug 7, 2013 6:48:00 GMT -5
Hi John, Hahaha of course Cheers, Mark.
|
|
|
Post by turbochris on Aug 7, 2013 9:56:00 GMT -5
yeah that doesn't look at all like my scary shit! Well done!
|
|
|
Post by pitciblackscotland on Aug 7, 2013 17:52:03 GMT -5
Hi Chris, Thanks mate - Cheers, Mark..
|
|
|
Post by pitciblackscotland on Oct 5, 2013 0:31:26 GMT -5
|
|
|
Post by pitciblackscotland on Oct 5, 2013 0:37:44 GMT -5
The IC engine (apu) will drive the fuel pump and alternator. Cheers, Mark
|
|
|
Post by pitciblackscotland on Oct 10, 2013 0:27:54 GMT -5
|
|