jamiep
Veteran Member
Joined: November 2010
Posts: 102
|
Post by jamiep on Jul 19, 2011 15:12:00 GMT -5
Do you have a pic/size of one? How much total to ship to 37221? 12 volts right?
jamie
|
|
wolfdragon
Senior Member
Joined: April 2011
Posts: 287
|
Post by wolfdragon on Jul 19, 2011 16:21:52 GMT -5
the repurposed hole saw / flame holder made me giggle...
|
|
jamiep
Veteran Member
Joined: November 2010
Posts: 102
|
Post by jamiep on Jul 19, 2011 16:45:09 GMT -5
;D You like that, huh? I was looking around the garage and that jumped out at me...
Jamie
|
|
|
|
Post by racket on Jul 19, 2011 16:53:39 GMT -5
Hi Jamie
Have you worked out your A/B jet nozzle size yet ??
Cheers
John
|
|
jamiep
Veteran Member
Joined: November 2010
Posts: 102
|
Post by jamiep on Jul 20, 2011 8:48:58 GMT -5
Racket - yes - it steps up to 4" then at the tail goes to 2.25"
Jamie
|
|
|
|
Post by ernie wrenn on Jul 20, 2011 10:52:21 GMT -5
12 vdc pump fgt approx 12.50 ernie Attachments:
|
|
jamiep
Veteran Member
Joined: November 2010
Posts: 102
|
Post by jamiep on Jul 20, 2011 11:13:12 GMT -5
send me a paypal invoice to jamieaprice at yahoo.com
Jamie
|
|
|
|
Post by ernie wrenn on Jul 20, 2011 16:20:35 GMT -5
Let me know if you get the invoice.
ernie
|
|
jamiep
Veteran Member
Joined: November 2010
Posts: 102
|
Post by jamiep on Jul 21, 2011 9:26:15 GMT -5
$$ sent! Let's make fire! Should get my stainless part back from the welder today or tomorrow.
Jamie
|
|
|
|
Post by ernie wrenn on Jul 22, 2011 7:43:13 GMT -5
pump going out UPS today.
ernie
|
|
jamiep
Veteran Member
Joined: November 2010
Posts: 102
|
Post by jamiep on Jul 25, 2011 16:19:47 GMT -5
Got the afterburner finished up for the most part over the weekend and it looks SEXY! I just need to weld in the metal fuel supply line and get all the pump stuff in place.  Jamie |
|
jamiep
Veteran Member
Joined: November 2010
Posts: 102
|
Post by jamiep on Jul 25, 2011 16:27:31 GMT -5
Ernie - how many amps does that fuel pump pull? I am thinking about running the fuel pressure with a PWM motor controller, basically, you turn the "volume" up on it for more or less flow. I need to know the amps so I can order the right one.
jamie
|
|
|
|
Post by ernie wrenn on Jul 26, 2011 7:31:49 GMT -5
I will put one on the test stand today and see what I come up with.
Did you get pump?
Ernie
|
|
jamiep
Veteran Member
Joined: November 2010
Posts: 102
|
Post by jamiep on Jul 26, 2011 11:33:07 GMT -5
not yet...but it could be at the house when I get home.
jamie
|
|
jamiep
Veteran Member
Joined: November 2010
Posts: 102
|
Post by jamiep on Jul 27, 2011 9:37:44 GMT -5
Received the pump and tested fine. The only thing I would have loved to see on that pump was threaded fittings at both ends...it's a little odd to have a threaded fitting on the low pressure side and a nipple on the high pressure side.
Any word on the amp draw?
Jamie
|
|
