|
Post by pitciblackscotland on Feb 16, 2020 22:58:53 GMT -5
|
|
|
Post by pitciblackscotland on Feb 16, 2020 23:01:46 GMT -5
|
|
|
Post by racket on Feb 17, 2020 0:29:48 GMT -5
Hi Mark
HEAVY DUTY :-)
Cheers John
|
|
|
Post by pitciblackscotland on Feb 17, 2020 3:28:40 GMT -5
Hi John, Yep I think i gone a bit over kill building the steel structure, need to weld in some gussets on the gold wing frame just in case Cheers, Mark.
|
|
Toni
Member
Joined: December 2020
Posts: 26
|
Post by Toni on Dec 26, 2020 14:05:10 GMT -5
What is situation whit this awesome project?
|
|
|
Post by pitciblackscotland on Dec 26, 2020 17:32:23 GMT -5
What is situation whit this awesome project? I am still working on this project, just been busy with other projects at the moment, thanks for the interest. So far machine up a couple of v band flanges, working on the duct system. Had to straighten the diff housing that's all done, finish off the welding on the rear of the frame and got the trike on wheels, still need to find a 19 inch rim for the front. Still lot more work to be done. Cheers, Mark.
|
|
slittlewing
Senior Member
Joined: November 2017
Posts: 458
|
Post by slittlewing on Dec 26, 2020 18:11:46 GMT -5
Alot of fantastic work in those few pictures! Love the machined v bands and tube β>coneβ>connection all in one, ingenious. Please post more as it progresses πππ
|
|
|
Post by pitciblackscotland on Dec 26, 2020 19:40:21 GMT -5
Alot of fantastic work in those few pictures! Love the machined v bands and tube β>coneβ>connection all in one, ingenious. Please post more as it progresses πππ Thanks mate There is not much incentive for me to keep posting updates on here, to many lurkers. if members on this forum who read this build thread click the like button then i would post more. I have a lot more interest from other forums, i will put a couple of photos now and again on here but will not go into full detail of the build. Cheers, Mark.
|
|
Sweetenough
Veteran Member
Joined: April 2016
Posts: 121
|
Post by Sweetenough on Dec 28, 2020 2:59:00 GMT -5
Nice work The V-band clamps for the flanges, are you planning to modify a existing clamps or make a own from scratch? Kind Regards Thomas
|
|
|
Post by pitciblackscotland on Dec 28, 2020 7:24:49 GMT -5
Nice work The V-band clamps for the flanges, are you planning to modify a existing clamps or make a own from scratch? Kind Regards Thomas Thanks Mr Thomas, i had a member from JATO send me some V band clamps that i carefully grind off the spot welds and will weld on a new ss strip to the V channels. I need to have the clamp at the correct size, i could not find the size i needed.
|
|