|
|
Post by racket on Jul 2, 2023 17:35:49 GMT -5
Hi Stephan
Big turbine wheels are pretty tough , so you might be OK :-)
Cheers
John
|
|
|
|
Post by stoffe64 on Jul 2, 2023 18:04:39 GMT -5
I hope your right John....it would be a major setback if it indeed is destroyed!
|
|
|
|
Post by stoffe64 on Jul 3, 2023 5:41:42 GMT -5
Compressor housing back on the turbo, the turbine and its internal housing is soaked with rust penetrating oil After a couple of hours it got fully loose so it can be turned around, but the housing dont come off get,turbine can rotate with some slight rubbing (dont know if it is because nothing hold the turbine housing down now) I hope i am lucky here and nothing is wrong with the wheel!  |
|
|
|
Post by stoffe64 on Jul 3, 2023 10:13:31 GMT -5
Well guys.....KAAABOOOMM!! IT WENT!! Now i need a New bearing housing....😥😢😭  |
|
|
|
Post by stoffe64 on Jul 3, 2023 15:36:26 GMT -5
Apparently the heat shield got stucked in the turbine housing so it got jammed by the rotating assembly so it could not come off.....
The context out of this is that it Will NOT become any engine...
|
|
|
|
Post by racket on Jul 3, 2023 17:30:27 GMT -5
Bummer :-(
|
|
|
|
Post by stoffe64 on Jul 3, 2023 23:44:29 GMT -5
Yes....  |
|
|
|
Post by turbinenjoe on Jul 4, 2023 12:20:47 GMT -5
Do you mean it was already damaged when you purchased it?
|
|
|
|
Post by stoffe64 on Jul 5, 2023 4:01:55 GMT -5
Hello no it was not,it has sat together for too long time....so everything is stucked together, i dismantled it now by taking off comp nut....then it come off,turbine still locked under heat shild in the turbine housing ,the heat shield is made of cast iron and has become one with the turbine housing:(
|
|
|
|
Post by stoffe64 on Jul 5, 2023 4:04:34 GMT -5
Bearing housings can NOT be found, atleast here in sweden.... |
|
|
|
Post by stoffe64 on Jul 5, 2023 5:58:30 GMT -5
Hi guys! My confusement is total now i discovered the fact that my turbo has the 3535977 turbine wheel, that is a G trim wheel for superback compressor wheel....  My turbo is a 4044033 a non superback turbo.....now i am totally lost here.  |
|
|
|
Post by stoffe64 on Jul 5, 2023 6:23:19 GMT -5
The compressor wheel from the turbo is a 3593926 and it do have the Exactly the hight as my New mamba which is a non superback wheel....some strange mix in this turbo then....non superback comp on a superback turbine wheel....I am VERY Confused now!   |
|
|
|
Post by stoffe64 on Jul 5, 2023 6:42:47 GMT -5
Apparently that compressor wheel 3593926 IS a superback wheel So the turbo was a superback but id tag Said something else...😑 Anyway i can NOT find any bearing housing 3539758 part number  |
|
|
|
Post by turbinenjoe on Jul 5, 2023 12:05:57 GMT -5
Well guys.....KAAABOOOMM!! IT WENT!! Now i need a New bearing housing....😥😢😭 Don‘t you think that it can be repaired? Did the missing material come off as a single piece so that it could possibly be TIG-welded back on after heating up the assembly? |
|
|
|
Post by stoffe64 on Jul 5, 2023 13:08:55 GMT -5
No No, it fall apart in several pieces,No i must find a replacement housing and that seem Difficult, atleast here in sweden
|
|
