|
Post by stoffe64 on Jun 8, 2017 9:40:22 GMT -5
It has plenty of cracks!
|
|
|
Post by stoffe64 on Jun 8, 2017 8:05:01 GMT -5
This forced me to look for another turbo Cheers /stephan
|
|
|
Post by stoffe64 on Jun 7, 2017 15:25:30 GMT -5
Good work there Anders, a fantastic Speedy build too,you will get her running good soon!! Cheers /stephan
|
|
|
Post by stoffe64 on Jun 7, 2017 7:55:31 GMT -5
It can explode you know, i would look for another turbine if i were you. Cheers /stephan
|
|
|
Post by stoffe64 on Jun 1, 2017 20:21:32 GMT -5
Hello Smithy! Go to danfoss homepage Look. For oil burner nozzles Cheers /stephan
|
|
|
Post by stoffe64 on May 29, 2017 18:21:31 GMT -5
Hello Keith! I am sure that this engine will Scream with ALOT of thrust,i will also follow this build with great interest....i really would want to build something similar in Size,instead i have to be satisfied with a "small" HOLSET HX60 Cheers/Stephan
|
|
|
Post by stoffe64 on May 29, 2017 11:25:34 GMT -5
Interesting build,is that turbo a Holset or is it such China copy? It should produce plenty of thrust!! Cheers/stephan
|
|
|
Post by stoffe64 on May 19, 2017 3:30:41 GMT -5
I have a question for you guys here Who uses bosch 044 pumps, Can two pumps be connected to eachother, outlet from first pump into the inlet of the second pump?....The thought about this is more stable pressure. Cheers /stephan
|
|
|
Post by stoffe64 on May 12, 2017 13:07:34 GMT -5
Amazing work as always Anders!
|
|
|
Post by stoffe64 on May 9, 2017 4:53:55 GMT -5
Hi John,thanks for your help, im a tad concerned about that very low pressure for atomizing the fuel properly, what do you think? Cheers /stephan
|
|
|
Post by stoffe64 on May 9, 2017 0:47:44 GMT -5
Sounds like a good descision Anders, run as it is at that landracing, maybe use that waterinjection and just enjoy the racing 🏁 Cheers /stephan
|
|
|
Post by stoffe64 on May 8, 2017 16:35:43 GMT -5
Didnt the temp gauge jump?...when you were running the föne base
|
|
|
Post by stoffe64 on May 8, 2017 15:43:25 GMT -5
Here is a chart over nozzles i found What do you guys think about Them? Cheers /stephan
|
|
|
Post by stoffe64 on May 8, 2017 9:28:38 GMT -5
I would have to count in The comp pressure at max,that would be about 2-2,5 bar? So the pump must first overwin that pressure as i have understood, then a 044 copy would not be so healthy and happy because it likes max 5 bar....hmmm i have to stay With that enormous hydraulik unit i have That fuel nozzle would have to have enough flow(1 liters) per minute at only 3 bar pressure right? Cheers /stephan
|
|
|
Post by stoffe64 on May 7, 2017 13:29:23 GMT -5
Bugger Anders!, time for a new pump?
|
|