|
|
Post by racket on Sept 26, 2015 19:35:20 GMT -5
Hi Mark
Thats some wiring job :-(
LOL, are you keeping the original Rover engine cutout switch under the seat in case you fall off ;-)
Cheers
John
|
|
|
|
Post by pitciblackscotland on Sept 26, 2015 19:39:19 GMT -5
Hi John,   I still have the cutout switch Mmmmm now you got me thinking  Cheers, Mark. |
|
|
|
Post by pitciblackscotland on Oct 2, 2015 3:58:06 GMT -5
|
|
|
|
Post by smithy1 on Oct 2, 2015 13:51:36 GMT -5
Very nice indeed....makes my wiring look rather poorly....mine is what I call.."functional"...it ain't pretty but it works...
Cheers,
Smithy.
|
|
|
|
Post by pitciblackscotland on Oct 2, 2015 15:14:35 GMT -5
Thanks Brett, Looking at it now i could of run the wiring top of the gauges. Lets hope the bloody thing works  Cheers, Mark. |
|
|
|
Post by racket on Oct 4, 2015 18:41:16 GMT -5
Hi Mark
LOL, bit of a "birds nest" in there ;-)
Love all the gauges, lights and toggle switches .
Cheers
John
|
|
|
|
Post by pitciblackscotland on Oct 4, 2015 20:12:38 GMT -5
Hi John, Thanks mate yeah bit of a birds nest still need to fit the EGT probe wires and pressure lines and then fed all the cables and lines threw the hole on the steering column housing which will be fun Cheers, Mark. |
|
|
|
Post by smithy1 on Oct 5, 2015 14:36:32 GMT -5
Where there's a will...there's a way... I'm sure you'll get it sorted. This is turning into a great project, looking forward to seeing it run.
Cheers,
Smithy.
|
|
|
|
Post by pitciblackscotland on Oct 5, 2015 22:12:58 GMT -5
Thanks Brett, Yeah and a lot of patience Want to get it looking nice and pretty and running well just like the GT60 kart and hopefully take it out and show it off Cheers, Mark. |
|
|
|
Post by pitciblackscotland on Nov 8, 2015 3:07:42 GMT -5
I got most of the wiring done, not as easy as i thought it would be. Need to debug some systems, oil pump runs for 2 seconds and blow a fuse, AB pump wont run speed controller blows a fuse, ignition system wont fire. Cheers, Mark.     |
|
|
|
Post by smithy1 on Nov 8, 2015 17:02:13 GMT -5
There's your problem right there in your pics.....it's too "neat"....you need to mess it up a bit to make it work properly...I know this from experience..LOL
Looking very nice indeed....you'll get it sorted, just a matter of nutting it out.
Cheers,
Smithy
|
|
|
|
Post by pitciblackscotland on Nov 8, 2015 21:00:34 GMT -5
LOL thanks Brett. I was thinking this is like a "birds nest" Or maybe I'm getting to anal about my work ?
Cheers,
Mark.
|
|
|
|
Post by smithy1 on Nov 9, 2015 16:10:54 GMT -5
LOL thanks Brett. I was thinking this is like a "birds nest" Or maybe I'm getting to anal about my work ? Cheers, Mark. No....yours is like a fine weaving job compared to mine...birds nest describes my effort to a T... But it does work.... Anal is a good thing...isn't it..??  I'm anal about some things... yet other things I just...meh..! Lord Knobrot |
|
|
|
Post by pitciblackscotland on Dec 12, 2015 21:43:23 GMT -5
I had to make some mods on these loading ramps so i could pull up the mower onto the back of my Hilux all good so now i can take this thing anywhere and also fitted a 12V winch to heilp load up on the tray All electrics are working now So will take the mower to End Z to get the HP fuel lines made and oil lines made up as well, then can do some pressure and leak tests and start work on the flame tube design. Cheers, Mark.      |
|
|
|
Post by racket on Dec 12, 2015 22:12:16 GMT -5
Hi Mark
Thats a big lump of a mower :-)
Is getting it off just as easy ??
Cheers
John
|
|
I still have the cutout switch Mmmmm now you got me thinking 
I'm anal about some things... yet other things I just...meh..!